 |
|
|
(8)
NITRA® pneumatic air valves are available in a wide variety of configurations to meet a broad range of pneumatic control air valve applications - pneumatic solenoid valves; modular solenoid air valves and manifolds; solenoid valve exhaust silencers; solenoid valve cables and connectors; air pilot valves; manual toggle, push-pull, rotary and foot-operated valves.
Solenoid valves are electrically controlled to direct air flow to sequence operations in pneumatic systems. Solenoid valves are used to control cylinders, rotary actuators, grippers and other pneumatic devices. Use a manifold to simplify plumbing for a bank of valves. Modular systems even allow networked control of valve groups.
|
|
|
|
|
|
|
|
|
|
|
NITRA® GM-3 series manifolds are designed to work with 10mm and 15mm wide GVP series valves. Valves must be mounted to a GM-3 series manifold (sold separately).
NITRA® GM-3 series manifolds are designed to work with 10mm and 15mm wide GVP series valves. Valves must be mounted to a GM-3 series manifold (sold separately).- Precision machined
- Compact
- Anodized aluminum for corrosion resistance
|
|
|
|
|
|
|
|
|
|
|
(6)
Glass filled nylon or brass bodies, Viton seals, brass or stainless operators.
|
|
|
|
|
|
|
|
|
|
|
Air operated valves are often used in areas where electrical signals would pose a hazard, or when air pressure control exists or is preferred. NITRA 5-port (4-way) spool valves are available with single-pilot spring return or double-pilot 2-position operation. Double-pilot models are also available in a 3-position center-closed configuration.
|
|
|
|
|
|
|
|
|
|
|
(4)
Manually operated air valves are ideal for non-electrical operator controlled applications. NITRA® manual valves are available in many convenient sizes and types including foot pedal valves, toggle and rotary style hand levers, push/pull valves, pushbutton, selector switch, key switch and even limit switch actuators.
|
|
|
|
|
|
|
|
|
|
|
(3)
Manually operated air valves are ideal for non-electrical operator controlled applications. NITRA® manual valves are available in many convenient sizes and types including foot pedal valves, toggle and rotary style hand levers, push/pull valves, pushbutton, selector switch, key switch and even limit switch actuators.
|
|
|
|
|
|
|
|
|
|
|
(5)
These high quality, square DIN style connectors and over-molded solenoid cables dramatically reduce wiring time.
These high quality solenoid valve connectors and over-molded solenoid cables help reduce wiring time. The lower voltage models, 24V or 110V AC/DC, include built-in surge suppression, yellow LED indicator and are rated for connecting with electronics. The 230V AC/DC models are rated for straight wired products. All solenoid connector cable models are available in five sizes based on DIN 43650.
|
|
|
|
|
|
|
|
|
|
|
NITRA L-Series Rodless Cylinders offer a robust design in a compact package. Rodless cylinders can offer the same stroke as rodded cylinders in a smaller space. All sizes have magnetic pistons and are double acting. Mounting brackets and cylinder position switches are sold separately.
|
|
|
|
|
|
|
|
|
|
|
NITRA® Pneumatic Rotary Actuators feature robust double rack and pinion construction and an a adjustable 0-190 degree rotation angle. The compact design is ideal for general material handling and other industrial applications such as conveying, clamping, transferring parts, positioning, and controlling valves.
|
|
|
|
|
|
|
|
|
|
|
(2)
NITRA® Pneumatic Grippers are pneumatic actuators with jaws (or fingers) to grip objects. Compressed air pneumatic grippers have the ability to pick up, hold and release objects. Two jaw parallel and two jaw angle grippers are available from AutomationDirect. Parallel grippers open and close parallel to the object and angle (or angular) grippers open wider than parallel jaws requiring more space. Pneumatic grippers are used in a broad range of general automation processes such as pick & place, material transfer, clamping and indexing.
|
|
|
|
|
|
|
|
|
|
|
(9)
The NITRA® CPS Series of cylinder position switches offers a robust, yet cost-effective, interface between pneumatic or hydraulic actuators and electrical control systems. Using state-of- the-art magnetic sensing technology, these switches are designed for use with cylinders that have a magnet incorporated in the cylinder piston. They can be used to provide cylinder position indication, cycle count, or to confirm operation.
|
|
|
|
|
|
|
|
|
|
|
(2)
I/P Transducers are electro-pneumatic regulators that control air pressure with a 4-20mA signal. NITRA® NCPx Series electro-pneumatic transducers (I/P) convert a 4-20 mA current signal(I) from a PLC or other controller to a linear pneumatic output pressure(P).
Current to pneumatic (I/P) electro-pneumatic transducers are also commonly known by other descriptions depending on industry applications and even location. Other popular descriptive used are proportional pressure regulators, current to pressure transducers and electronic pressure regulators.
|
|
|
|
|
|
|
|
|
|
|
(5)
Tubing are the convenient way to connect pneumatic control components. All-purpose PUR, nylon, and PTFE tubing options accommodate a variety of application needs. Hose (PUR or Nylon, often with a reinforcing braid) generally refers to tubing with connectors pre-attached.
|
|
|
|
|
|
|
|
|
|
|
(5)
Hose are the convenient way to connect pneumatic control components.
|
|
|
|
|
|
|
|
|
|
|
(2)
- Couplers are available in Industrial Interchange manual or automatic and universal automatic
- Male and female NPT threaded connections
- Allow easy changing of tools or hose connections and prevent kinking and strain on supply lines
|
|
|
|
|
|
|
|
|
|
|
- Connection: 1/4 female NPT thread size on inlet (pocket model has 1/4" male industrial interchange quick disconnect)
- NITRA® pneumatic blow guns start at bleed off air pressure downstream before disconnecting
|
|
|
|
|
|
|
|
|
|
|
(4)
Pneumatic devices combined with convenient push-to-connect fittings create lightweight, miniature versions of many popular system components, including regulators, gages, flow controls, quick exhaust and hand valves. Easy to install, NITRA® special-purpose fittings can be plumbed into a machine either permanently or for low-cost troubleshooting or testing.
|
|
|
|
|
|
|
|
|
|
|
- Downstream air pressure can be easily adjusted to a range of 15 to 120 psi with a built-in relief valve to exhaust over-pressure
- These regulators can be installed in series or parallel with other special inline fittings
- Works with flexible pneumatic tubing
- Easily added to existing circuits
- Ideal for use in secondary branches of a pneumatic system
- Use with PGU series pressure gages for precise control
|
|
|
|
|
|
|
|
|
|
|
- Installs easily anywhere in a pneumatic circuit
- Works with flexible pneumatic tubing
- Easily added to existing circuits
- Ideal for use in secondary branches of a pneumatic system
- Use with PRU series pressure regulators for precise control
|
|
|
|
|
|
|
|
|
|
|
- No/Low Pressure (< 29 psi) - indicator is clear
- Pressure ON (> 29 psi) - colored indicator appears
- Green or orange pressure ON indicators
- Works with flexible pneumatic tubing
- Easily added to existing circuits
|
|
|
|
|
|
|
|
|
|
|
NITRA® special purpose push-to-connect pneumatic fittings.- Union straight check valves allow air flow in one direction and block air flow in the reverse direction
- Union straight stop valves - when downstream pneumatic tube is removed from the stop valve, upstream air pressure is blocked
- Inch and metric pneumatic check valve and stop valve fitting sizes available
|
|
|
|
|
|
|
|
|
|
|
Bleed valves offer an easy solution to releasing trapped or excess air pressure from a pneumatic system. Simply press the button to exhaust air pressure.- Durable nickel-plated brass body and threads construction
- Available with standard pipe thread and 10-32 thread
|
|
|
|
|
|
|
|
|
|
|
(2)
NITRA® brass pneumatic air jets are useful for numerous applications including cooling, chip removal, moving small parts, etc.
|
|
|
|
|
|
|
|
|
|
|
(4)
Manifolds provide a convenient junction point for the distribution of fluids or gases. Simply thread fittings into the ports to produce an organized method of supplying multiple lines from a single source.
|
|
|
|
|
|
|
|
|
|
|
(2)
ProSense® pressure switches and sensors are designed to monitor relative system pressure in many applications such as hydraulics and pneumatics.- ProSense® pressure sensing solutions use a variety of sensing technologies to meet most any industrial pressure sensing application.
- Vacuum sensors provide an accurate readout of increases and decreases in vacuum systems
|
|
|
|
|
|
|
|
|
|
|
(4)
The PTD, SPTD and SPT series of compact pressure transmitters provide an analog output for reliable pressure indication and offer quick installation and easy setup. Pneumatic pressure ranges from 15 to 200 psig. Additional ranges up to 5000 psig in Process Control & Measurement.- PTD Series Ceramic Sensing Element - M12 Cable Connection
- SPTD Stainless Steel Sensing Element - M12 Cable Connection
- SPT Stainless Steel Sensing Element - Integral Cable
- SPT Stainless Steel Sensing Element - DIN Connector
|
|
|
|
|
|
|
|
|
|
|
Ideal for industrial pressure measurement and indication in both air/gas and liquid applications. Pneumatic pressure ranges are available from vacuum to 145 psig. Additional measuring ranges are available from vacuum up to 5800 psig in Process Control & Measurement. Selectable engineering units such as psig, bar, mbar, kPa, MPa, inches of water column, and inches of mercury can be displayed.
|
|
|
|
|
|
|
|
|
|
|
Designed for air, non-corrosive gas and non-flammable gas applications, these small (1.2" by 1.2" by 1.7" deep) digital pressure switches/ pressure transmitters have a 3-color LCD display and provide two digital outputs and one analog output (NOT suitable for liquid applications)
|
|
|
|
|
|
|
|
|
|
|
(3)
ProSense® mechanical dial pressure gages are available in a variety of configurations for displaying pressure readings in most pneumatic, hydraulic, HVAC, plumbing, industrial and commercial applications. These high quality pressure gages use Bourdon tube sensing elements and do not require any external power sources to operate other than the media being sensed.
Black steel case models are IP52 rated with brass wetted parts.
These general purpose industrial pressure gages come with a 5 year warranty and can be used as vacuum gages, air pressure gages, PSI pressure gages, hydraulic pressure gages or for many other applications.
|
|
|
|
|
|
|
|
|
|
|
ProSense® DPG1 digital pressure gauges are ideal for industrial and general purpose applications requiring an accurate and reliable device with easy-to-read digital display.
|
