|
|
|
The NITRA® Pneumatics A-Series non-repairable stainless steel round body cylinders includes bore sizes from 7/16" to 2" and stroke lengths from 1/2" to 18" to meet a broad range of applications. Air pneumatic cylinders are also sometimes referred to as pneumatic actuators.
The round-body disposable style of pneumatic cylinder is the workhorse of most pneumatic systems. NITRA® A-series cylinders are dimensionally interchangeable with other leading manufacturers, and are perfect for replacement applications as well as new designs.
|
|
|
|
|
|
|
|
|
- These high quality disposable cylinders (non-repairable) are constructed with stainless steel bodies and double rolled-in high strength aluminum end caps with full flow ports.
- To minimize friction, the inside of the pneumatic cylinder body is polished to a mirror finish and all air cylinders are pre-lubricated for optimum performance and long, reliable life.
- The high strength aluminum alloy piston is securely threaded, sealed and riveted to a piston rod that is ground and roller burnished 303 stainless steel (7/16" and 9/16" bores) or ground and polished high strength carbon steel ( 3/4" - 2" bores) with roll-formed threads for exceptional strength.
- Low friction wear compensating Buna N U-cup rod and piston seals, oil impregnated rod guide bushing (except 7/16" and 9/16" bores), and end caps with slots all combine for smooth breakaway even at low pressures.
- Interchangeable with other common brands of round body cylinders
- Excellent selection of air cylinder stroke lengths
- Single-acting (spring return cylinders) and double-acting cylinder models
- Nose, pivot and double-end cylinder mounting options
- Type 304 stainless steel cylinder body with high-strength aluminum alloy end caps
- Pre-lubricated for long, maintenance-free performance
- Pneumatic actuator models available with magnetic piston for position indication
- All pneumatic air cylinder models are available for same-day shipment
- Made in North America
|
|
|
|
Double-acting pneumatic actuators have two compressed air ports. One of the ports will extend the rod in the "push" direction and the other port will retract the rod in the "pull" direction.
|
|
|
|
- Nose mount uses one AMB mounting bracket and one AN nut
- Pivot mount uses one APB or one APBP cylinder mounting bracket
- Double end mount uses two AMB mount brackets and two AN nuts
|
|
|
|
Item# - AN-38-24
Item Name - NITRA® Non-repairable Pneumatic Cylinder (A-Series) Accessories- Cylinder mounting nut
- Cylinder mounting bracket
- Cylinder pivot mounting bracket without pivot pin
- Cylinder pivot mounting bracket with pivot pin
- Cylinder rod clevis and hex nut
|
|
|
|
|
|
|
|
