|
|
|
Konnect-It® single-level terminal blocks can handle currents up to 175A, can accept a wide range of wiring sizes from 26 AWG to 2/0 AWG and have a 100kA SCCR rating. Single-level terminal blocks are available in a variety of colors.
|
|
|
|
|
|
|
|
|
The Konnect-It® KN Series offers cost-effective screw terminal blocks and related components that are modular in design and fit on a 35mm DIN rail (standard terminal blocks), or 15mm DIN rail (mini terminal blocks). These terminal blocks employ a terminal connection system that meet the demands of the industrial environment and are suitable for factory wiring as well as field-wiring connections.- Robust terminal block system provides organized connection and identification of two or more wires in an industrial environment
- Terminate solid or stranded wires ranging from 26 to 1/0 AWG
- Fusing, grounding or disconnecting capability within the electrical terminal block itself
- Screw-down terminal block jumper technology uses an insulated jumper system to provide a reliable connection to each terminal block
- The Konnect-It® series of terminal blocks are internationally approved by national and international standards organizations such as UL, CSA, CE, VDE, and IEC
- Available in convenient 25 per pack sizes
The Konnect-It® terminal block series provides reliable, economical wire termination for just about any industrial application. Konnect-It® terminal blocks are available in cost-effective quantity packages as well as smaller convenience packs for certain terminal block types.
|
|
|
|
End Brackets
Konnect-It® end brackets prevent terminal blocks and other DIN rail mounted components and devices from sliding along the rail. They are available in configurations for 35mm DIN rails and 15mm DIN rails.
End Covers
Konnect-It® end covers are used to electrically and visually separate the last live open terminal in an assembly. This is a vital function since terminal blocks are supplied with one open side.
Top Covers
Konnect-It® top covers serve as protective covers for un-insulated jumpers. They are available blank or printed with the electrical symbols. Label holders attach to end brackets or DIN rail mountables and provide for easy identification of terminal block assemblies.
Separators
Konnect-It® separators allow visual and electrical separation of terminal block groups and provide the necessary electrical spacing between adjacent insulated jumpers or between exposed ends of cut jumpers.
Marking Tags
Provide system organization and efficient identification of the terminals and other components. Konnect-It® marking tags are available in blank or pre-printed configurations and fit onto the terminal blocks.
Terminal Block Jumpers
Using screw-down technology to electrically interconnect two or more consecutive terminal blocks, Konnect-It® jumpers can carry up to 100% of the rated terminal block current.
DIN Rails, Mounting Clips & Support Brackets
DIN rail provides easy installation and removal of terminal blocks and other devices:- Steel DIN rail - 35mm and 15mm
- Aluminum DIN rail - 35mm
- DIN rail brackets and mounting clips
|
|
|
|
|
|
|
|
