All Categories > Motors > Industrial Direct Current (DC) Motors > Item # 1300  


Item # 1300, Armature 0.33 to 1.5 Horsepower (hp) Permanent Magnet Direct Current (DC) Motor

IronHorse motors are manufactured by leading motor suppliers with over 20 and 45 years of experience delivering high-quality motors to the demanding U.S. market. Our suppliers test the motors during production and after final assembly. This is how we can stand behind our IronHorse motors with a two-year warranty (motors 1/3 HP and above); or one-year warranty (motors 1/4 HP and less).

IronHorse DC motors are designed for use on unfiltered SCR (Thyristor) type and PWM (pulse width modulated) type DC adjustable speed drives, and on across-the-line DC controls.





Specifications  · Additional Information  · Features  · Applications  · Form Factor  · Accessories

Specifications

Brands
AutomationDirect

Power
0.33 to 1.5 hp

Direct Current (DC) Voltage
56 to 90 V

Service Factor
1.0

Warranty
2 year

Industry Standards
cCSAus
Conformite Europeenne (CE)


Additional Information
DC motors are designed for use on unfiltered SCR (Thyristor) type and PWM (pulse width modulated) type DC adjustable speed drives, and on across-the-line DC controls.

DC motors are designed for use with unfiltered SCR (Thyristor) type and PWM (pulse width modulated) type DC adjustable speed drives, and on across-the-line DC controls. DC motors are perfect for conveyors, turntables, anywhere adjustable speed and constant torque are required, or when dynamic braking and/or reversing are needed.


Features
  • Replacement brush sets
  • Simple two-lead connection
  • Class F insulation
  • Input power of 115 or 230 volts rectified AC can be used with an appropriate SCR drive
  • Linear speed/torque characteristics over entire speed range
  • High starting torque for heavy load applications
  • Capable of dynamic braking for faster stops
  • Available in TENV or TEFC housings, depending on model
  • NEMA 56C flange mount
  • Rolled steel shell frame / cast aluminum end bell
  • Removable feet
  • STABLE™ motor slide base available for adjustable mounting
  • Large replaceable brushes for longer brush life
  • Easy access to DC motor brushes (shipped with set of spare brushes)
  • Large easy-to-wire junction box with rubber gasket
  • Heavy-duty oversized ball bearings
  • High tensile strength steel shaft
  • Electrically reversible


Applications
  • Conveyors
  • Turntables
  • Where adjustable speed and constant torque are required
  • When dynamic braking and reversing capabilities are needed


Form Factor
The voltage used to power a permanent magnet (PM) DC motor is not pure DC. It is derived by rectifying a supplied AC voltage. The resulting DC voltage has a ripple that is related to the frequency of the AC input.

Form factor is the ratio of Irms to Idc and indicates how close the driving voltage is to pure DC. The form factor for a DC battery is 1.0. The higher the form factor is above 1.0, the more it deviates from pure DC.

Form factor should not exceed 1.35 for continuous operation. Half wave rectification is not recommended as it drastically increases form factor.

Operating Ironhorse PMDC motors with DC voltages with form factors higher than 1.35 can result in premature brush failure and excessive motor heating.


Accessories
Item# - MTPM-BRUSH-1)
Description - Spare / replacement brushes, Adjustable base for larger DC motors



Print Back