All Categories > Pneumatic Air Cylinders > Item # 1175  


Item # 1175, NITRA® E-Series Dual Rod Guided Air Pneumatic Cylinders

NITRA® pneumatic guided actuator with dual guide rods, bronze bushings, extruded aluminum housing and switch mounting tracks.
  • Double-acting cylinders
  • Interchangeable with other common brands of guided rod cylinders
  • 90 sizes available
  • Eight bore sizes from 12mm to 63mm
  • Non-rotate tolerance of ±0.10º or less





Specifications  · Additional Information  · Features  · Operation  · Applications

Specifications

Brands
AutomationDirect
NITRA®

Body Material
Anodized 6463-T5 Aluminum

Temperature
23 to 158 ºF

Seal Material
Nitrile Butadiene Rubber (NBR) (Buna-N)

Warranty
2 year


Additional Information
Dual rod cylinders provide additional stability for shear forces or side loads, and prevent rotation at the rod end. The handy T-slots along their length (and mounting holes in the tooling plate) make NITRA E-series double-acting cylinders easy to mount, even to each other to enable convenient x-y motion without machining brackets or extra parts.
  • Fittings can be mounted in either the top or the side of the cylinder (2 plugs included with each cylinder)
  • Magnetic switches can be mounted on the top or bottom of the cylinders
  • Constructed with high quality components: chrome plated stainless steel guide rods, mild steel tooling plate, Nitrile / Buna-N O-rings
  • Multiple mounting options


Features
  • Double Acting
  • Magnet around piston for sensing
  • Dual guide rods - SAE440 Chrome Plated stainless steel
  • Tooling Plate - free machining steel (low carbon 1018/1020)
  • Heavy-duty bronze bushings
  • Proof (burst) pressure 213psi
  • All models are available for same-day shipment


Operation
Double-acting cylinders have two compressed air ports. One of the ports will extend the rod in the "push" direction and the other port will retract the rod in the "pull" direction.


Applications
  • Product guiding, positioning and stopping on conveyors
  • Accurate pick-and-place
  • Applications that cannot tolerate single actuation point or rotational miss-alignment and any high side load applications



Print Back